SW 316 Stove Pipe Stainless Steel

What we think

Push fit, stainless steel, single wall chimney for use on medium and high temperature solid and multifuel applications. Available in sizes from 100 to 500 mm Stocked in sizes from 100 to 300 mm Standard finish is: Stainless finish 1 year manufacturer's warranty for all products installed and maintained in accordance with the installation and usage notes. All products can be powder coated to any BS or RAL colour code

  • Flue and Chimney: Single Wall Stove Pipe
  • Fuel type: Multi Fuel

SW 316 STAINLESS STEEL (0.9mm).

  • Push fit, stainless steel, single wall chimney for use on medium and high temperature solid and multifuel applications.
  • Available in sizes from 100 to 500  mm
  • Stocked in sizes from 100 to 300  mm
  • Standard finish is: Stainless finish
    • 1 year manufacturer’s warranty for all products installed and maintained in accordance with the installation and usage notes.
    • All products can be powder coated to any BS or RAL colour code

SW 316 0.9MM IS SUITABLE FOR USE ON THE FOLLOWING APPLICATIONS:

SW 316 0.9MM DESCRIPTION:

    • Midtherm SW 316 is a range of prefabricated stainless steel single wall flue. Both the 316 grade stainless steel 0.7mm (22g) and the 0.9mm product have a dull (2B) finish. SW 316 is used as a connecting flue pipe and for lining existing chimneys.
    • NOTE: Adjustable Elbows included in range.

JOINT TYPE:

  • Push fit socket and spigot type joint. Locking bands are available if required.

 SW 316 0.9MM INSTALLATION AND USAGE NOTES:

  • All flue system installations, i.e. oil, gas, solid and multi fuel, should be carried out by a suitably qualified installer or Building Control Department permission must be granted.

FOR DETAILED INSTALLATION GUIDELINES PLEASE REFER TO:

  • The relevant Technical Information and Installation Instructions
  • Building Regulations
  • Planning Office
  • Appliance Manufacturers Operating and Maintenance Instructions
  • Relevant British Standards